Grab those for me. March 30, , You might also check the SATA cable since they tend to break rather easily and that is a frequent cause for these types of problems. This kind of problem is almost always the result of the drive being slow to spin up on a cold boot. If I change the cables and then try again, it works.
|Date Added:||11 December 2016|
|File Size:||23.80 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
March 26, So, testing and back up of that drive is critical. Download PCWizard, an excellent free utility, from here: Hi, I think you need to look at the motherboard again to check the model number.
Go to the drive manufacturer’s site and download their diagnostics and test the drive. Samsung SyncMaster – 15 inches Network Card: If your connection were to fail during an Internet flash, you would likely have a dead system.
I have a spare sata hard disk. That will tell you if the drive is ga-k8vm8000m. If I change the cables and then try again, it works. March 29, Hi, the latest bios can be downloaded from here: So, I think we are dealing with a different model motherboard.
SATA DRIVES NOT RECOGNISED IN BIOS FOR GIGABYTE GA K8VM MOTHERBOARD
You really have two different issues. So, that drive should be tested.
You might also check the SATA cable since they tend to break rather easily and that is a frequent cause for these types of problems. Microsoft Windows XP Professional 5. If the drive is not spinning up properly, the bios cannot access the drive when it is ready to turn over the system boot to the drive.
SATA DRIVES NOT RECOGNISED IN BIOS FOR GIGABYTE GA K8VM800 MOTHERBOARD
The BIOS document tells you how to do that. March 31, You may also need this utility: This kind of problem is almost always the result of the drive being slow to spin up on a cold boot. Remember to backup your current bios image before flashing. If you leave the battery out for about 15 minutes with the system unplugged from the wall, that gigabtte clear your current bios settings and may fix the problem without needing to reflash the bios.
Those boards usually have bios settings that must be set right in order to recognize SATA drives.
Slow spinup times is often a sign that the drive is failing, and will fail shortly. You might try installing a fresh motherboard battery first. Your manual will tell you how to do gs-k8vm800m also. March 30, Gigabyte lists three models in their support: The bios prevents hard drive access until the drive is spinning at its’ rated speed.
My Server Gigabyte GA-K8VM800M wont see my 500GB Sata drive
I could see this on the mother board. First the IDE drive.
Only use the “not through the Internet” method as described in 4. Grab those for me. HI Thanks for the reply.